| Technical data | PA 1250 CM | |
| Workspace | ||
| Distance between centers | mm | 2000-10000 |
| Swing diameter above bed | mm | 1250 |
| Swing diameter above cross slide | mm | 1000 |
| Diameter of face plate | mm | 850 |
| Tool cross section | mm | 50x25 |
| Headstock and spindle | ||
| Spindle nose | DIN | 55021 |
| N° | 11 | |
| Spindle bore | mm | 140 |
| Spindle diameter at front bearing | mm | 190 |
| Spindle rpm | ||
| Range I | min1 | 1-128 |
| Range II | min1 | 129-315 |
| Range III | min1 | 316-800 |
| Bed and slideways | ||
| Bed width | mm | 650 |
| Width of carriage | mm | 820 |
| Cross slide travel | mm | 610 |
| Max.feed rate X/Y axis | m/min | 5 |
| Electric motor | ||
| Main drive | kW | 28.5 |
| Cross drive | kW | 2.49 |
| Longitudinal drive | kW | 4.36 |
| Tailstock | ||
| Quill diameter | mm | 120 |
| Quill taper | Morse | 6 |
| Maximum workpiece weight | ||
| Between centers with one steady | kg | 5000 |
| Between centers with two steady | kg | 6500 |
| Unsupported from one end | kg | 800 |
| Weight of machine (=2000mm) | kg | 11500 |
| Additional for every meter | kg | 1200 |
| Maximum togque at faceplate | Nm | 5000 |
