| Technical data | PD 2000 CM | |
| Workspace | ||
| Distance between centers | mm | 2000-10000 |
| Swing diameter above bed | mm | 2000 |
| Swing diameter above cross slide | mm | 1600 |
| Diameter of face plate | mm | 1600 |
| Tool cross section | mm | 60X40 |
| Headstock and spindle | ||
| Spindle nose | DIN | 55026 |
| N° | 15 | |
| Spindle bore | mm | 210 |
| Spindle diameter at front bearing | mm | 260 |
| Spindle rpm | ||
| Range I | min1 | 1-069 |
| Range II | min1 | 70-140 |
| Range III | min1 | 141-500 |
| Bed and slideways | ||
| Bed width | mm | 1120 |
| Width of carriage | mm | 1200 |
| Cross slide travel | mm | 1000 |
| Max.feed rate X/Y axis | m/min | 5 |
| Electric motor | ||
| Main drive | kW | 37/56 |
| Cross drive | kW | 2.49 |
| Longitudinal drive | kW | 4.36 |
| Tailstock | ||
| Quill diameter | mm | 220 |
| Quill taper | Morse | ME80 |
| Maximum workpiece weight | ||
| Between centers with one steady | kg | 16000 |
| Between centers with two steady | kg | 20000 |
| Unsupported from one end | kg | 2500 |
| Weight of machine (=2000mm) | kg | 24000 |
| Additional for every meter | kg | 2000 |
| Maximum togque at faceplate | Nm | 16000 |
