| Technical data | PA 1250 | |
| Workspace | ||
| Distance between centers | mm | 2000-10000 |
| Swing diameter above bed | mm | 1250 |
| Swing diameter above cross slide | mm | 1000 |
| Diameter of face plate | mm | 850 |
| Tool cross section | mm | 50X25 |
| Headstock and spindle | ||
| Spindle nose | DIN | 55021 |
| N° | 11 | |
| Spindle bore | mm | 140 |
| Spindle diameter at front bearing | mm | 190 |
| *Alternative spindle bore | mm | 322 |
| Spindle rpm | ||
| Range I | min1 | 1-128 |
| Range II | min1 | 5-315 |
| Range III | min1 | 12.5-800 |
| Bed and slideways | ||
| Bed width | mm | 650 |
| Width of carriage | mm | 820 |
| Cross slide travel | mm | 610 |
| Electric motor | ||
| Main drive | kW | 28.5 |
| Motor rpm´s | min1 | 50-3400 |
| Feed rates | ||
| Number of feed rates | 42 | |
| Feed rates longitudinal (Z) | mm/rot | 0.049-5.6 |
| Feed rates traversal (X) | mm/rot | 0.024-2.8 |
| Thread pitches | ||
| Number of pitches | 42 | |
| Metric threads | mm | 0.75-64 |
| Withworth | pitch/1ʺ | 9/16-064 |
| Modul | 1-016 | |
| Tailstock | ||
| Quill diameter | mm | 120 |
| Quill taper | Morse | 6 |
| Maximum workpiece weight | ||
| Between centres with one steady | kg | 5000 |
| Between centres with two steady | kg | 6500 |
| Unsupported from one end | kg | 800 |
| Weight of machine (=2000mm) | kg | 10000 |
| Additional for every meter | kg | 1000 |
| Maximum togque at faceplate | Nm | 5000 |
